RhinoChem 2170
(formerly Hi-Chem)
Technical Data Sheet
Part A - Isocyanate
Part B - Resin
PRODUCT TYPE
Elastomeric polyurethane. 100% solids (no (VOCs, no solvents)
(Variations: can be pigmented)
GENERAL PROPERTIES:
RhinoChem 2170 is a two-component, 100% solids (no VOCs, no solvents), exothermic,
rapid curing, elastomeric polyurethane lining system specifically designed for excellent chemical resistance.
# Dense chemical structure imparts high impermeability
# Excellent corrosion resistance
# Excellent chemical resistance
RECOMMENDED USES
# Durable protective lining with excellent chemical resistance for applications
such as:
o primary and secondary containment.
o Chemical processing equipment, tank lining and wet wells.
o Water and wastewater.
o Immersion service
# Spray-on application creates a monolithic, seamless lining, which conforms to any
shape or size.
# Stable from –40 0C to 79.4 0C.
NOT RECOMMENDED FOR:
# Sustained temperatures below –40 0C or above 79.4 0C. Exhibits short term
stability up to 100 0C.
# Concrete substrates subject to high impact.
# Application to high density polyethylene or thermo plastics.
CHEMICAL RESISTANCE:
> RhinoChem 2170 has excellent resistance to a variety of commercial and industrial
chemicals.
Examples of some of the chemicals it can withstand are listed below.
For further information, please refer to a chemical_info@yahoo.com
> Properties were checked against a RhinoChem 2170 polyurethane lining, 3.18mm thick
stock at 23.8 0C.
Results may vary at elevated temperatures.
Acetic Acid to 10% Hydrochloric Acid to 15% Salts
Ammonia to 5% Hydrogen Peroxide to 10% Salt Solution
Bleach Nitric Acid to 10% Sodium Hydroxide to 50%
Caustic Soda Lye to 50% Oils Sodium Hypochlorite to 13%
Cleansing Chemicals Phosphoric Acid to 50% Sulphuric(Sulfuric) Acid to 50%
Disinfecting Chemicals Potash Lye to 20% Tannic Acid to 50%
SUBSTRATES:
Metals, wood, concrete, brick, fibreglass and geotextiles.
VOLATILE ORGANIC CONTENT:
None. 100% solids. No solvents.
DRY FILM THICKNESS RANGE (subject to application)
O Varies based on application, typically used at a minimum of 2mm to 4mm.
O Waterproof Coating Thickness: 2+ mm.
O Chemical Immersion Coating Thickness: Bund Floors 3 to 6+ mm, Walls 3+ mm.
SHELF LIFE and CONTAINER SIZE:
Part A – Isocyanate: nine months, unopened. 75kg and 250kg Drums.
Part B – Resin: nine months, unopened. 62kg and 204kg Drums.
BASE MATERIAL COLOURS:
Isocyanate – amber/dark brown colour.
Resin – Off-white
COLOUR OPTIONS:
Limited colour range available.
TYPICAL PHYSICAL PROPERTIES OF RhinoChem 2170
Hardness (Shore D) 70±3 ASTM D-2240
Tensile Strength (psi)* 3500 – 3700 ASTM D-412
Elongation (%) 25 – 30 ASTM D-412
Taber Abrasion Resistance (mg of loss/1000 cycles)
CS17 Wheel: 1000 grams weight 53 ASTM D-4060
Tear Resistance (pli)* Die C 180 – 190 ASTM D-624
Impact Resistance(2.54mm thick sample) No cracking deterioration Gardner Tester
* Properties were checked using RhinoChem
2170 polyurethane lining 3.18 mm thick stock.
REACTIVITY:(Tested in cups, 161g combined @ 25 deg C)
Initiation 30-40 secs; Gel time 40-60 secs; Tack Free/Solid \<180 secs; 95-99% cure 24 hours.
SAFETY PRECAUTIONS:
Health Considerations: consult Rhino Linings Material Safety Data Sheets.
The uncured components of Rhino Linings RhinoChem 2170 can cause irritation to
the eyes, skin, mucous membranes and are harmful is swallowed. When handling,avoid contact with eyes and skin (especially open cuts). In case of contact,immediately wash off with plenty of water for at least fifteen (15) minutes. For eyes, obtain medical attention. Always wash hands before eating. Obtain immediate medical
attention in case of ingestion.
RhinoChem 2170 contains isocyanates and may cause allergic skin or respiratory reactions. Do not use if you have chronic breathing problems (asthma) or if you have ever had reactions to isocyanates. When applying RhinoChem 2170, avoid breathing harmful vapours. Fresh air-supplied standard painter’s hood or full face respirator must be worn by all personnel entering the area where RhinoChem 2170 is being applied until all vapours have been exhausted. In case of extreme exposure or adverse reaction, remove affected personnel to fresh air immediately and obtain medical help.
Important: consult the Rhino Linings Material Safety Data Sheets.
Read and follow warning labels on all components.
For professional use only. Follow cautions and handling guidelines in
Rhino Linings Technical Manual. The information herein is believed to be reliable, but unknown risks may be present. All warranties of any kind, expressed or implied, including warranties of fitness for a particular purpose, are specifically
disclaimed.
For your Protection:
The information and recommendations in this publication are, to the best of our knowledge,reliable. Suggestions made concerning the products and their uses, applications, storage and handling are only the opinion of Rhino Linings Australasia Pty Ltd. Users should conduct their own tests to determine the suitability of these products for their own particular purposes and of the storage and handling methods herein suggested. The toxicity and risk characteristics of products made by Rhino Linings Pty Ltd will necessarily differ from the toxicity and risk characteristics developed when such products are used with other materials during a manufacturing process. The resulting risk characteristics should be determined and made known to ultimate end-users and processors. Because of numerous factors affecting results,
Rhino Linings Australasia Pty Ltd makes no warranty of any kind, express or implied,
other then that the material conforms to its applicable current Standard
Specifications. Rhino Linings Australasia Pty Ltd hereby disclaims any and all
other warranties, including but not limited to those of merchant
ability or fitness for a particular purpose. No statements made herein may be construed as a representation or warranty. The liability of Rhino Linings
Australasia Pty Ltd for any claims arising from or sounding in breach of warranty, negligence, strict liability, or otherwise shall be limited to the purchase price of the material.
For any further information please feel free to contact.
Michael S. Thang
+622168068293, +628164850242
